CP-3 Titanium
At Titanium Processing Center we can provide the Grade 3 commercially pure titanium you need for your next project. We have no minimum order requirements, so you can order in small or large quantities and we’ll still get it shipped as soon as possible. Our goal is to provide same or next day shipping on all our in-stock titanium products, and we can still get it sent out even if your order requires special, value-added services like cutting, drilling or shearing.
Grade 3 titanium is a great choice in the chemical and marine industries for its high resistance to corrosion, and its strength and lightweight characteristics mean that you can also use them for aircraft construction. We sell Grade 3 titanium as bars, billets, plates, wire, pipe, and more.
Contact us today to learn more about this material or get an instaQuote on your next order today.
| Chemical Composition (%) (Max. values unless range is shown) |
0.08 C; 0.25 FE*, 0.05 N; 0.30 O; 0.015 H (sheet; 0.0125H (bar); 0.00100 H (billet) |
||||
| MILL ANNEALED TENSILE PROPERTIES |
Guar. R.T. Min. | Typical Elev. Temp. Prop. | |||
|---|---|---|---|---|---|
| 600 F | 800 F | 1000 F | |||
| Ultimate Strength (psi) | 65,000 | 32,000 | 29,000 | 22,000 | |
| Yield Strength (psi)0.2% offset | 55,000 | 20,000 | 17,000 | 13,000 | |
| Elongation in 2″ (%) Sheet > 0.025 thick |
18 | 35 | 18 | 33 | |
| Reduction in Area (%) Bar | 30 | 70/80 | 70/80 | 70/80 | |
| TITANIUM MECHANICAL PROPERTIES | *Also available with 0.05 max FE for superior corrosion resistance. | ||||
| Stress Rupture in Time Shown |
Stress (psi) | 20,000 | |||
| Time (Hrs.) | 100 | ||||
| Stress and Time to Produce Elongation Shown (Creep) |
Stress (psi) | ||||
| Time (Hrs.) | |||||
| Creep (%) | |||||
| Charpy V-Notch Impact (ft.-lbs.) at Room Temperature | 20-40 | ||||
| Bend Radius | Under 0.070″ thick | 2.0 X Thickness | |||
| 0.070″ And Over | 2.5 X Thickness | ||||
| Welded Bend Radius | 2.0 – 3.0 X Thickness | ||||
| Hardness | RΒ90 | ||||
| TITANIUM PHYSICAL PROPERTIES | |||||
| Beta Transus (F ± 25) | 1690 | ||||
| Coefficient of Thermal Expansion (10-6in./in./F) | 32-212 | 4.8 | |||
| 32-600 | 5.1 | ||||
| 32-1000 | 5.4 | ||||
| 32-1200 | 5.6 | ||||
| 32-1500 | 5.6 | ||||
| Density (lbs./cu. in.) | 0.163 | ||||
| Melting Point, Approx (F) | 3020 | ||||
| Electrical Resistivity at Room Temp. (Microhms cm) | 56 | ||||
| Modulus Elasticity – Tension (106 psi) | 15.0 | ||||
| Modulus Elasticity – Torsion (106 psi) | 6.5 | ||||
| Thermal Conductivity (Btu/hr/sq. ft./F/ft.) |
9.5 at Room Temperature | ||||
| Specific Heat (Btu/lb./F) at Room Temp. | 0.124 | ||||
| Weldability | Good | ||||
| Annealing Temp. (F) | Full | 1300°/30 Min. – 2 Hrs,; Air Cool | |||
| Stress Relief | 1000-1100°/30 Min.; Air Cool | ||||
| Forging* Temp. (F) | Blocking | 1600-1700° | |||
| Finishing | 1500-1600° | ||||
| Available Mill Products | Bar, Billet, Extrusions, Plate Sheet, Strip, Wire, Pipe, Tubing | ||||
| Typical Application | For corrosion resistance in the chemical and marine industries;for aircraft construction. | ||||
| Industry Specifications | ASTM
|
||||
For more information on our Grade 3 titanium, give us a call at 586-716-7555 or use our instaQuote.
Contact Titanium Processing Center (TPC)
Titanium Processing Center (TPC) is a stocking distributor and service center of commercially pure and titanium alloy products in bar, sheet, plate, pipe, tubing, fasteners, fittings and more. We provide professional service and certified titanium products from our headquarters in New Baltimore, Michigan.
Contact us TODAY, buy now from our online store, or give us a call toll-free at 888-771-9449.