CP Grade 2 Titanium
Titanium Processing Center is a fully stocked supplier of commercially pure grade 2 titanium. This material is ideal for projects that require a high resistance to corrosion, such as aircraft construction or chemical and industrial applications. We are committed to working with our customers to deliver your materials as quickly as possible. Contact us today to place your order, and if it’s in stock we can get it shipped out on the same or the next day.
We also have a wide range of value added services, so if you need the titanium machined, cut, drilled or otherwise modified, we can help. Take a look at the characteristics and properties of the Grade 2 titanium that we regularly stock and then get an instaQuote on the materials you need for your project today.
Chemical Composition (%) (Max. values unless range is shown) |
0.08 C; 0.25 FE*, 0.03 N; 0.20 O; 0.015 H (sheet; 0.0125H (bar); 0.00100 H (billet) |
||||
MILL ANNEALED TENSILE PROPERTIES |
Guar. R.T. Min. | Typical Elev. Temp. Prop. | |||
---|---|---|---|---|---|
600 F | 800 F | 1000 F | |||
Ultimate Strength (psi) | 50,000 | 30,000 | 26,000 | 19,000 | |
Yield Strength (psi)0.2% offset | 40,000 | 18,000 | 15,000 | 11,000 | |
Elongation in 2″ (%) Sheet > 0.025 thick |
20 | 37 | 25 | 32 | |
Reduction in Area (%) Bar | 20 | 70/80 | 70/80 | 70/80 | |
MECHANICAL PROPERTIES | *Also available with 0.05 max FE for superior corrosion resistance. | ||||
Stress Rupture in Time Shown |
Stress (psi) | ||||
Time (Hrs.) | |||||
Stress and Time to Produce Elongation Shown (Creep) |
Stress (psi) | ||||
Time (Hrs.) | |||||
Creep (%) | |||||
Charpy V-Notch Impact (ft.-lbs.) at Room Temperature | 25-40 | ||||
Bend Radius | Under 0.070″ thick | 1.5 X Thickness | |||
0.070″ And Over | 2.0 X Thickness | ||||
Welded Bend Radius | 2.0 – 3.0 X Thickness | ||||
Hardness | RΒ70 | ||||
PHYSICAL PROPERTIES | |||||
Beta Transus (F ± 25) | 1675 | ||||
Coefficient of Thermal Expansion (10-6in./in./F) | 32-212 | 4.8 | |||
32-600 | 5.1 | ||||
32-1000 | 5.4 | ||||
32-1200 | 5.6 | ||||
32-1500 | 5.6 | ||||
Density (lbs./cu. in.) | 0.163 | ||||
Melting Point, Approx (F) | 3020 | ||||
Electrical Resistivity at Room Temp. (Microhms cm) | 56 | ||||
Modulus Elasticity – Tension (106 psi) | 14.9 | ||||
Modulus Elasticity – Torsion (106 psi) | 6.5 | ||||
Thermal Conductivity (Btu/hr/sq. ft./F/ft.) |
9.5 at Room Temperature | ||||
Specific Heat (Btu/lb./F) at Room Temp. | 0.124 | ||||
Weldability | Good | ||||
Annealing Temp. (F) | Full | 1300°/30 Min. – 2 Hrs,; Air Cool | |||
Stress Relief | 1000-1100°/30 Min.; Air Cool | ||||
Forging* Temp. (F) | Blocking | 1600-1700° | |||
Finishing | 1500-1600° | ||||
Available Mill Products | Bar, Billet, Extrusions, Plate Sheet, Strip, Wire, Pipe, Tubing | ||||
Typical Application | For corrosion resistance in the chemical and marine industries; in aircraft construction where higher strength level and ease of formability is desired. |
||||
Industry Specifications | ASTM
|
Contact Titanium Processing Center (TPC)
Titanium Processing Center (TPC) is a stocking distributor and service center of commercially pure and titanium alloy products in bar, sheet, plate, pipe, tubing, fasteners, fittings and more. We provide professional service and certified titanium products from our headquarters in New Baltimore, Michigan.
Contact us TODAY, buy now from our online store, or give us a call toll-free at 888-771-9449.