Grade 23 Titanium: 6AL-4V Eli Titanium
Grade 23/6AL-4V Eli is ideal for surgical implants, salt water applications, and other similar applications. Like all titanium, it still provides incredible strength and durability along with a resistance to corrosives like acids and gasses. At Titanium Processing Center we offer grade 23 titanium in bar, billet, extrusions, plate, sheet, strip, and wire.
Take a look at some of the characteristics and properties listed on the chart to discover whether or not this material is right for your application. Contact us with any questions and we will work with you to determine your needs and make sure you get the right grade of titanium. We are a fully stocked provider, and most of our titanium will ship same or next day (if you require extra machining or fabrication it may take up to 24 hours).
Get an instaQuote today on your next project.
| Chemical Composition (%) (Max. values unless range is shown) |
0.08 C; 0.13 O, 5.5/6.5 AL; 0.25 FE; 3.5/4.5 V; 0.015 H (sheet); 0.0125H (bar); 0.0100 H (billet) |
||||
| MILL ANNEALED TENSILE PROPERTIES |
Guar. R.T. Min. | Typical Cryogenic Prop. | |||
|---|---|---|---|---|---|
| -320 F | – – – – | – – – – | |||
| Ultimate Strength (psi) | 130,000 | 220,000 | |||
| Yield Strength (psi)0.2% offset | 120,000 | 205,000 | |||
| Elongation in 2″ (%) Sheet > 0.025 thick |
10 | 14 | |||
| Reduction in Area (%) Bar | 25 | ||||
| ALLOY MECHANICAL PROPERTIES | |||||
| Stress Rupture in Time Shown |
Stress (psi) | ||||
| Time (Hrs.) | |||||
| Stress and Time to Produce Elongation Shown (Creep) |
Stress (psi) | ||||
| Time (Hrs.) | |||||
| Creep (%) | |||||
| Charpy V-Notch Impact (ft.-lbs.) at Room Temperature | 18 | ||||
| Bend Radius | Under 0.070″ thick | 4.5 X Thickness | |||
| 0.070″ And Over | 5.0 X Thickness | ||||
| Welded Bend Radius | 60 – 10.0 X Thickness | ||||
| Hardness | Rc35 | ||||
| ALLOY PHYSICAL PROPERTIES | |||||
| Beta Transus (F ± 25) | 1810 | ||||
| Coefficient of Thermal Expansion (10-6in./in./F) | 32-212 | 5.0 | |||
| 32-600 | 5.3 | ||||
| 32-1000 | 5.6 | ||||
| 32-1200 | 5.9 | ||||
| 32-1500 | 6.1 | ||||
| Density (lbs./cu. in.) | 0.160 | ||||
| Melting Point, Approx (F) | 3200 | ||||
| Electrical Resistivity at Room Temp. (Microhms cm) | 171 | ||||
| Modulus Elasticity – Tension (106 psi) | 16.5 | ||||
| Modulus Elasticity – Torsion (106 psi) | 6.1 | ||||
| Thermal Conductivity (Btu/hr/sq. ft./F/ft.) |
4.2 at Room Temperature | ||||
| Specific Heat (Btu/lb./F) at Room Temp. | 0.135 | ||||
| Weldability | Fair | ||||
| Annealing Temp. (F) | Full | 1300 – 1525°/15 Min. – 2 Hrs,; Air Cool | |||
| Stress Relief | 900-1200°/1 Min. – 4Hrs; Air Cool | ||||
| Forging* Temp. (F) | Blocking | 1750 – 1800° | |||
| Finishing | 1650 – 1750° | ||||
| Available Mill Products | Bar, Billet, Extrusions, Plate Sheet, Strip, Wire | ||||
| Typical Application | Will develop high fracture toughness by using special mill processing and heat treatment; surgical implants, salt water applications. For high pressure cryogenic vessels down to 0320°F |
||||
| Industry Specifications | ASTM
|
||||
Contact Titanium Processing Center (TPC)
Titanium Processing Center (TPC) is a stocking distributor and service center of commercially pure and titanium alloy products in bar, sheet, plate, pipe, tubing, fasteners, fittings and more. We provide professional service and certified titanium products from our headquarters in New Baltimore, Michigan.
Contact us TODAY, buy now from our online store, or give us a call toll-free at 888-771-9449.